When your ducts are full of dust, pet dander, and debris, every breath in your home pays for it. Our Licensed and Insured Duct Cleaners Pleasant Grove UT team pulls that buildup out with HEPA vacuum systems and rotary brush equipment, then proves the result with a duct camera inspection. We are certified duct cleaning contractors in Pleasant Grove, Utah, licensed through Utah DOPL and carrying full liability coverage. Same-day and 24/7 emergency appointments are available across 84062.
Licensed and Insured Duct Cleaners Pleasant Grove UT is a credentialed HVAC duct cleaning service that removes accumulated dust, dander, mold spores, and construction debris from the supply and return ductwork of a home or business. In practice, that means we cut a service opening, run a rotary brush duct cleaning machine through every branch line, and pull the loosened material into a HEPA vacuum. We finish with a duct camera inspection system so you can see the inside of the trunk line on our monitor before we close it up.
Most Pleasant Grove homes we open up have the same story: 10 to 20 years of Utah County dust, plus pet hair packed against the return grilles. If you have noticed musty odors from ductwork or a jump in allergy symptoms each spring, the ductwork is usually the culprit. We also handle dryer vent lint blockage and fire risk, which is the one call we never want to be late for. Ask about our certified duct cleaning contractors Pleasant Grove UT availability when you book.
Every full-system duct cleaning covers the supply and return ductwork, the furnace cabinet, and a camera verification walkthrough. Add-ons like dryer vent cleaning, HVAC coil cleaning, and vent cover washing can be bundled into the same visit. Here is what comes standard.
We clean every supply and return branch line from the trunk to the farthest register using a rotary brush duct cleaning machine and air compressor whip. A typical 2,000-square-foot Pleasant Grove home has 12 to 20 openings. All of them get the same treatment, no shortcuts on the far end of the house.
A HEPA vacuum pulls all loosened debris into a sealed collection unit. We run it continuously during agitation so nothing settles back into the ductwork. This is the step that removes the 2 to 6 pounds of dust, dander, and debris we commonly find in a Pleasant Grove home.
The furnace cabinet and blower wheel collect dust that never makes it to the registers. We open the cabinet, vacuum the interior, and clean the blower wheel by hand. A clean blower moves more air and pulls less amperage, which shows up on your electric bill over a full season.
Before we seal anything up, we run a duct camera inspection system through the main trunk and show you the footage on our monitor. You see the before and after with your own eyes. If we missed something, you will see it too, and we go back in until it is right.
Every access point we cut gets sealed with duct sealant mastic and foil tape before we leave. A poorly sealed service opening leaks conditioned air into your attic or crawlspace and undoes the benefit of cleaning. We test each seal by hand and confirm the system is airtight.
We pull every vent cover and register, wash them, and vacuum the boot and branch line behind each one. This is included on every full-system job. It is a small step that makes a visible difference in room-level dust within the first week after service.
We start by counting supply and return registers, checking the furnace and coil cabinet, and looking for obvious problem spots like a disconnected branch line in the attic. You get a flat price before any equipment comes off the truck. No surprises, no add-ons halfway through the job.
Before we touch a single duct, we seal every register with vent covers and registers, drop cloth the floors, and set up negative air machine containment at the main trunk. This keeps loosened debris from blowing back into your living space. It takes about 15 minutes and it is the reason your kitchen counters stay clean.
We feed a rotary brush duct cleaning machine and an air compressor whip through each branch line, working from the farthest register back toward the trunk. This is the step that breaks loose the caked-on dust that a vacuum alone cannot touch. Expect to hear the brush working; that noise means it is doing its job.
A HEPA vacuum pulls everything the brush loosened into a sealed collection unit. We also clean the furnace cabinet, blower wheel, and evaporator coil with a coil cleaning pump sprayer and coil cleaning chemicals where buildup is heavy. This is where the bulk of the 2 to 6 pounds of debris leaves your system.
Before we close anything up, we run a duct camera inspection system through the main trunk and show you the footage on our monitor. You see the before and after with your own eyes. We then re-seal every service opening with duct sealant mastic and foil tape, restore the registers, and walk the system with you.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
The primary agitation tool for branch lines. The rotating brush head breaks caked-on dust loose from duct walls so the vacuum can actually capture it instead of just skimming the surface.
A HEPA vacuum pulls loosened debris into a sealed collection unit while a negative air machine maintains containment at the trunk. Together they keep dust out of your living space during the entire job.
A flexible camera we run through the trunk and branch lines. We use it to document the before condition, find disconnected or crushed runs, and show you the after result on our monitor before we seal up.
A high-pressure air line with a whipping nozzle that scours the last few feet of each branch line where a brush cannot reach. It is the finishing pass that gets the far registers truly clean.
A rotating auger and long brush set used to clear the full dryer vent run from the appliance connection to the exterior termination. We follow it with an airflow reading to confirm the blockage is gone.
A low-pressure sprayer used to apply coil cleaning chemicals to the evaporator coil without bending fins. We rinse with a controlled stream and flush the drain pan afterward.
A calibrated fan and pressure gauge used to measure system airflow and duct leakage. We use it to confirm that a dryer vent or duct run is actually moving the air volume it should after cleaning.
A 1,400-square-foot home near Old Town with original duct board trunk lines and no record of ever being cleaned. The return grille was matted with dust and the homeowner reported musty odors every time the furnace kicked on. Camera inspection showed a quarter-inch layer of debris along the entire trunk.
We pulled roughly 5 pounds of dust and debris out of the system over a three-hour job. The camera footage after cleaning showed bare duct board along the full trunk line. The homeowner reported the musty smell was gone the same evening and the furnace ran noticeably quieter.
A 2,400-square-foot newer build with two golden retrievers. The return grille was completely blocked with hair, airflow at the far bedrooms was weak, and the homeowner was changing filters every six weeks instead of every three months. Camera inspection found hair mats packed into the first three feet of every return branch.
We hand-pulled the hair mats before running the rotary brush, then extracted with HEPA vacuum. Total debris removed was just over 6 pounds. Airflow at the farthest bedroom register improved enough that the homeowner could feel the difference by hand. Filter life returned to a normal three-month cycle.
A Grove Creek home where the dryer had been taking two full cycles to dry a load of towels. The exterior vent flap barely moved when the dryer ran. The vent run had four elbows and had not been cleaned since the home was built 14 years earlier.
We ran the dryer vent auger and brush through the full run and cleared a dense lint plug near the third elbow. The blower door test reading after cleaning showed airflow back within normal range. Dry time returned to a single cycle and the exterior flap snapped open with real force.
These are the five calls we get most often from homeowners in 84062. Each one has a clear cause and a clear fix.
Ask a pro →We agitate every branch line with a rotary brush duct cleaning machine and extract with a HEPA vacuum. For a typical Pleasant Grove home, that removes 2 to 6 pounds of accumulated material. We finish with a camera pass so you can see the clean trunk line on our monitor.
We inspect the full system with a duct camera inspection system, identify the moisture source, and clean the affected runs. If the evaporator coil or drain pan is the culprit, we clean it with a coil cleaning pump sprayer and coil cleaning chemicals. We will tell you honestly if remediation beyond cleaning is needed.
We pull the hair mats out of the return boots and branch lines by hand before running the rotary brush. The volume of hair we remove from a two-pet home is usually the thing that surprises customers most. We also advise on HEPA filter upgrades to slow the buildup between cleanings.
We run a dryer vent auger and brush the full run to the exterior termination, then confirm airflow with a blower door test reading. If the vent run is crushed or has too many elbows, we flag it for replacement. Annual cleaning is the standard we recommend for every Pleasant Grove home.
Ask for two things: the Utah DOPL contractor license number and a current certificate of insurance. You can look the license up directly on the Utah Division of Occupational and Professional Licensing website. For insurance, call the number on the certificate and confirm the policy is active. Any legitimate duct cleaning company in Pleasant Grove will hand both over without hesitation. If they stall, walk away.
Ours does, and you should not hire anyone who does not. General liability coverage protects your home if a technician damages drywall, duct board, or a furnace component during the job. We also carry bonding, which matters if you pay a deposit. Ask to see the certificate of insurance before work begins, and verify the policy is still active by calling the insurer directly.
In Utah, duct cleaning contractors operate under a Utah DOPL contractor license, and technicians who handle refrigerant lines for HVAC coil cleaning need EPA Section 608 certification. NADCA ASCS certification is voluntary but it is the credential that separates trained duct cleaners from guys with a shop vac. We hold all three. Ask any company you are considering which credentials their field techs actually carry.
The company that shows you the inside of your ducts on camera before and after, hands you a license number you can verify, and quotes a flat price before starting. That is how we run every job. If you want to compare, call two or three Pleasant Grove duct cleaning companies and ask each one for their DOPL number and a camera walkthrough. The difference will be obvious.
Air Duct Cleaning Near MeOur core duct cleaning service covers every supply and return line in your Pleasant Grove home. We pair rotary brush agitation with HEPA extraction and finish with a camera walkthrough. Most single-family homes take two to four hours from arrival to final inspection.Explore →
24/7 Air Duct CleaningWhen a duct issue cannot wait until morning, our 24/7 line stays live. Common after-hours calls include a dryer vent that stopped moving air, a return line that collapsed in the attic, and post-renovation drywall dust pulled through the system. Call (855) 927-7517 any hour.Explore →
Emergency Air Duct CleaningEmergency duct calls in Pleasant Grove usually involve water intrusion, rodent debris in ducts, or a dryer vent clog that has already tripped the thermal fuse. We prioritize these jobs and typically arrive same day. We isolate the affected run, extract the contamination, and verify airflow before we leave.Explore →
Residential Air Duct CleaningSingle-family homes in 84062 make up most of our work. We size the equipment to your system, protect floors and furnishings, and clean the furnace cabinet and coil while we are in there. You get a flat quote before we start and a camera walkthrough at the end.Explore →
Commercial Air Duct CleaningRestaurants, offices, and retail spaces in Pleasant Grove need duct cleaning on a schedule, not on a whim. We work after hours to avoid disrupting your business, document the job with camera footage, and follow NADCA standards for commercial ventilation systems. Ask about recurring maintenance plans.Explore →
HVAC Duct CleaningHVAC duct cleaning goes beyond the ductwork itself. We clean the blower wheel, evaporator coil, and furnace cabinet, then seal every service opening with duct sealant mastic and foil tape. That full-system approach is what actually restores airflow and drops your static pressure readings.Explore →
Furnace and Duct CleaningBefore heating season, we pull the furnace cabinet apart, clean the blower and heat exchanger surfaces, and run the full duct system. Pleasant Grove winters push furnaces hard, and a dusty blower wheel costs you efficiency all season. Book this in September or October.Explore →
Air Vent CleaningRegister and vent covers collect a visible layer of dust that most homeowners never think to clean. We pull every vent cover and register, wash them, vacuum the boot and branch line behind each one, and reinstall. It is a fast add-on that makes a noticeable difference in room-level air quality.Explore →We are licensed through Utah DOPL, fully insured, and bonded. Every job ends with a camera walkthrough so you see exactly what you paid for. Call (855) 927-7517 for a flat quote and same-day availability across Pleasant Grove and Utah County.
Get a Flat Quote (855) 927-7517 →Call (855) 927-7517 and a real person answers, not a call center two states away. We book most Pleasant Grove jobs within 24 hours and keep same-day slots open for dryer vent and emergency calls. If you prefer email, send your address and what you are seeing and we will reply with a flat quote.